Hollow scrubber Type SP
1.3 Hollow scrubber Type SP
The hollow scrubber Type SP is intended for the chemical cleaning of the process and ventilation emissions from dust and gaseous compounds of fluorine, chlorine and sulphur dioxide by means of the alkaline absorption by the aqueous solutions of sodium hydroxide or sodium carbonate in various fields of industry.
Performance specifications
|
Inlet mass concentration of the gaseous fluorine compounds, g/m3, not more than |
1.0 |
|
Treatment degree, %, not less than |
92. -..98.5 |
|
Main construction material |
Steel V StЗsp5 State Standard 380—71 |
The scrubber’s body is a bearing structure for the maintenance of gangways and stairs as well as the fume stack.
|
Dimension type of the scrubber |
Capacity, m3/h |
Dimensions, mm (L*H*W) |
Weight, kg |
|
SP-600-3-01 |
5 100 — 9 200 |
1400*16620*1750 |
4 900 |
|
SP-900-3-01 |
11 400 — 20 600 |
1820*17370*1835 |
6 800 |
|
SP- 1200-3-01 |
20 300 — 36 600 |
2100*18110*1870 |
8 500 |
|
SP- 1600-3-01 |
36 200 — 65 100 |
2500*19400*2630 |
12 000 |
|
SP-2000-3-01 |
56 500 — 101 700 |
2920*20050*3060 |
14 600 |
The scrubber is manufactured in a climatic version. The placement category according to the State Standard 15150—69 is intended for installation on the ‘D’ enterprises according to the Construction Rules and Regulations SNiP P-90—81.
Scrubber Type SP:
1 – scrubber body; 2 – inlet pipe; 3 – absorbent draw-off connection; 4 – steam heater; 5 - nozzles; 6 - swirler; 7 – drain draw-off connection; 8 – outlet pipe.
